Cumulative U.S. installed onshore wind capacity exceeded 100 gigawatts (GW) on a nameplate capacity basis as of the end of September 2019, according to the U.S. Energy Information Administration’s (EIA) Preliminary Monthly Electric Generator Inventory. More than half of that amount has been installed since the beginning of 2012. The oldest wind turbines still operating in the United States came online as early as 1975.
Source: U.S. Energy Information Administration, Preliminary Monthly Electric Generator Inventory
As of the third quarter of 2019, 41 states had at least one installed wind turbine. Texas had the most capacity installed, at 26.9 GW, followed by Iowa, Oklahoma, and Kansas. These four states accounted for half of the total U.S. installed wind capacity.
In the United States, wind turbines tend to come online late in the year. Based on information reported in the Preliminary Monthly Electric Generator Inventory, EIA expects that an additional 7.2 GW of capacity will come online in December 2019. EIA also expects that another 14.3 GW of wind capacity will come online in 2020. If realized, the United States would have about 122 GW of wind capacity by the end of next year.
Something interesting to share?
Join NrgEdge and create your own NrgBuzz today
floating fish feed pellet machine is widely used for produce high-grade aquatic feed pellets for fish, catfish, tilapia,shrimp,crab,lobsters,etc.Food for fishes requires contains rich crude protein, but the crude protein in the food is hard to digest for the fish.Fish feed pellet mill is specially designed to solve such problems. After being extruding processed by the machine, the feed can be easy to digest. Moreover, the user can change extrusion degree to influence floating time,it also can produce both floating and sinking type fish feed pellet .Fish food making machine with advanced single screw extruder,doesn’t need steam boiler.Floating fish feed pellet mill is used to produce floating fish feeds at home or for small scale fish farms with low cost investment.It ensures the new investors affordable to the machine,it is the best choice for aquaculture farms ,small and medium fish feed processing plants .
The floating fish feed pellet machine production equipment operated well without any preconditioning of the feed material other than grinding. This allows the fish food making machine to accept a dry, free flowing material, therefore simplifying the preparation equipment.The fish feed pellet machine can produce human foods, animal feeds and adhesives made from cereal grains. it can impart cooks that destroy undesired enzymes, such as urease, lipase and myroxinase. These extruder machine transform cereal,grain,oilseeds into porous collects that dissolve extract very efficiently. The outlet of fish feed pellet mill equipped with a firmly mounted mold, so it can produce different size and shape feed pellet .Moreover, one fish feed pellet machine is equipped with extra easy wear parts for free including two sleeves, one screw, one cutting knife and three die moulds.
Animal feed pellet mill is mainly used for small-scale production of animal and poultry feed pellets, it’s popular in grain feed factory, farm, poultry farm,small size feed plant.The raw materials are easy to obtain in most place, like corn, maize, wheat bran, rice, beans,cassava,grass ,stalk etc. Driven by electric motor makes it more energy-saving and environmental friendly,,it can be used for diesel drive for the electric power shortage area.The animal feed pellet market is growing fast with recent years,feed pellet mill machine becomes more and more popular in breeding industry. Featured with the unique advantages of competitive price, low consumption,simple structure and small area coverage,it is an ideal pelleting machine for small-scale industrial production and home use.That’s why more and more families and plants choosing them to produce the feed pellets.
Features of livestock feed pellet making machine
● Cheap price
The feed pellets are expensive and can cost you much money. you will not have to buy the pellets from the shop with this machine.Due to their different model with different prices, you can select one that will match your budget.
The good thing about this machine is that it caters for both small and large farmers. It will help you develop high quality feeds that will improve the growth of your livestock. The machine is great because you will get the feeds without much effort. It will perform most of the tasks for you.
● Small size
Cattle feed equipment is small and light in weight to allow you to transfer it to your place of choice.With the pig feed pellet machine, you will perform all the tasks by yourself.
● Easy to operate
This feed pellet making machine adopted high precision gear driven,advanced flexible coupling to get high production efficiency .Once you purchase this equipment, you will easily come up with quality feed pellets without any skills,it’s not necessary to hiring a professional worker to operate it for you.
On 10 December 2021, if all goes to plan Royal Dutch Shell will become just Shell. The energy supermajor will move its headquarters from The Hague in The Netherlands to London, UK. At least three-quarters of the company’s shareholders must vote in favour of the change at the upcoming general meeting, which has been sold by Shell as a means of simplifying its corporate structure and better return value to shareholders, as well as be ‘better positioned to seize opportunities and play a leading role in the energy transition’. In doing so, it will no longer meet Dutch conditions for ‘royal’ designation, dropping a moniker that has defined the company through decades of evolution since 1907.
But why this and why now?
There is a complex web of reasons why, some internal and some external but the ultimate reason boils down to improving growth sustainability. Royal Dutch Shell was born through the merger of Shell Transport and Trading Company (based in the UK) and Royal Dutch (based in The Netherlands) in 1907, with both companies engaging in exploration activities ranging from seashells to crude oil. Unified across international borders, Royal Dutch Shell emerged as Europe’s answer to John D Rockefeller’s Standard Oil empire, as the race to exploit oil (and later natural gas) reserves spilled out over the world. Along the way, Royal Dutch Shell chalked up a number of achievements including establishing the iconic Brent field in the North Sea to striking the first commercial oil in Nigeria. Unlike Standard Oil which was dissolved into 34 smaller companies in 1911, Royal Dutch Shell remained intact, operating as two entities until 2005, when they were finally combined in a dual-nationality structure: incorporated in the UK, but residing in the Netherlands. This managed to satisfy the national claims both countries make on the supermajor, second only to ExxonMobil in revenue and profits but proved to be costly to maintain. In 2020, fellow Anglo-Dutch conglomerate Unilever also ditched its dual structure, opting to be based fully out of the City of London. In that sense, Shell is following the direction of the wind, as forces in its (soon to be former) home country turn sour.
There is a specific grievance that Royal Dutch Shell has with the Dutch government, the 15% dividend tax collected for Dutch-domiciled companies. It is the reason why Unilever abandoned Rotterdam and is now the reason why Shell is abandoning The Hague. And this point is particularly existentialist for Shell, since its share prices has been battered in recent years following the industry downturn since 2015, the global pandemic and being in the crosshairs of climate change activists as an emblem of why the world’s average temperatures are going haywire. The latter has already caused the largest Dutch state pension fund ABP to stop investing in fossil fuels, thereby divesting itself of Royal Dutch Shell. This was largely a symbolic move, but as religious figures will know, symbols themselves carry much power. To combat this, Shell has done two things. First, it has positioned itself to be at the forefront of energy transition, announcing ambitious emissions reductions plans in line with its European counterparts to become carbon neutral by 2050. Second, it is looking to bump up its dividend payouts after slashing them through the depths of the Covid-19 pandemic and accelerating share buybacks to remain the bluest of blue-chip stocks. But then, earlier this year, a Dutch court ruled that Shell’s emissions targets were ‘not ambitious enough’, ordering a stricter aim within a tighter timeframe. And the 15% dividend tax remains – even though Prime Minister Mark Rutte’s coalition government has been attempting to scrap it, with (it is presumed) some lobbying from Royal Dutch Shell and Unilever.
As simplistic it is to think that Shell is leaving for London believes the citizens of the Netherlands has turned its back on the company, the ultimate reason was the dividend tax. Reportedly, CEO Ben van Buerden called up Mark Rutte on Sunday informing him of the planned move. Rutte’s reaction, it is said was of dismay. And he embarked on a last-ditch effort to persuade Royal Dutch Shell to change its mind, by immediately lobbying his government’s coalition partners to back an abolition of the dividend tax. The reaction was perhaps not what he expected, with left-wing and green parties calling Shell’s threat ‘blackmail’. With democracy drawing a line, Shell decided to walk; or at least present an exit plan endorsed by its Board to be voted by shareholders. Many in the Netherlands see Shell’s exit and the loss of the moniker Royal Dutch – as a blow to national pride, especially since the country has been basking in the glow of expanded reputation as a result of post-Brexit migration of financial activities to Amsterdam from London. The UK, on the other hand, sees Shell’s decision and Unilever’s – as an endorsement of the country’s post-Brexit potential.
The move, if passed and in its initial stages, will be mainly structural, transferring the tax residence of Shell to London. Just ten top executives including van Buerden and CFO Jessica Uhl will be making the move to London. Three major arms – Projects and Technology, Global Upstream and Integrated Gas and Renewable Energies – will remain in The Hague. As will Shell’s massive physical reach on Dutch soil: the huge integrated refinery in Pernis, the biofuels hub in Rotterdam, the country’s first offshore wind farm and the mammoth Porthos carbon capture project that will funnel emissions from Rotterdam to be stored in empty North Sea gas fields. And Shell’s troubles with activists will still continue. British climate change activists are as, if not more aggressive as their Dutch counterpart, this being the country where Extinction Rebellion was born. Perhaps more of a threat is activist investor Third Point, which recently acquired a chunk of Shell shares and has been advocating splitting the company into two – a legacy business for fossil fuels and a futures-focused business for renewables.
So Shell’s business remains, even though its address has changed. In the grand scheme of things, never mind the small matter of Dutch national pride – Royal Dutch Shell’s roadmap to remain an investment icon and a major driver of energy transition will continue in its current form. This is a quibble about money or rather, tax – that will have little to no impact on Shell’s operations or on its ambitions. Royal Dutch Shell is poised to become just Shell. Different name and a different house, but the same contents. Unless, of course, Queen Elizabeth II decides to provide royal assent, in which case, Shell might one day become Royal British Shell.
End of Article